Deutz 1012 Specifiche Scaricare il pdf (Pagina 264)

Service Training

Section 4.9

Page 38

12.05

MAINTENANCE ON VAPORISOR

Maintenance on the vaporisor should include the checking of the secondary valve actuating lever (1).

The Impco maintenance kits are used for two different vaporisor types (series E and EP). As a result, a

check must be carried out, and, if necessary, the actuating lever (1) has to be bent accordingly.

To carry out the check and the bending adjustment, proceed as follows:

After assembly of the maintenance kit, check the position of the connecting pin (4) using a setting bar (3)

and a feeler gauge. A setting bar is placed over the housing (5). The spring (2) pushes the valve into its

closed position. The distance between the connecting pin (4) and the setting bar (3) must be 1 mm. If

necessary, the actuating lever (1) should be bent to achieve this dimension.

1 Actuating lever

2 Spring

3 Setting bar

4 Secondary diaphragm connecting pin

5 Vaporizor housing

1 2 ... 259 260 261 262 263 264 265 266 267 268 269 ... 281 282

Nessun commento

Deutz 1012 Specifiche Pagina 264