Deutz 1012 Specifiche Scaricare il pdf (Pagina 20)

100

101

Page 12

Section 4.1

Service Training

09.06

4.1.1.7 ADJUSTING THE BEGIN OF DELIVERY

If an injection pump must be replaced, the begin of delivery must be re-adjusted by determining the shim

thickness anew.

DETERMINING THE SHIM THICKNESS

The old injection pump and shim are not required for this procedure.

NOTE: From 4/95, the mounting depth of the injection pump has been increased by 10 mm so that the

EP code changes from 70 to 170 and the basic dimension L

of the injection pump from 109

mm to 119 mm.

The metod of determining the thickness of the shims for the old versions remains the same.

Proceed as follows:

In the column marked "EP", read the EP code for cylinder 3 on the type plate on the rocker cover,

e.g. 070 or 170 (reading sequence: line 1 = cylinder 1, line 2 = cylinder 2, etc.).

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 281 282

Service Training 1
353 804 2401.0906 282

Commenti su questo manuale

Nessun commento

Deutz 1012 Specifiche Pagina 20

Commenti su questo manuale

Prodotti e manuali riguardandi Motore Deutz 1012